Part Number Hot Search : 
BT2540 90075 AP1122T 3N213 90075 UT252 TA0175H AP4750
Product Description
Full Text Search
 

To Download MES50A Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 24 ~ 50W AC-DC Single Output and Medical Type Desktop
Features :
MES50A
series
Universal AC input / Full range 3 pole AC inlet IEC320-C14 Class power ( with earth pin) Full output 3~48V safety approval Protections: Short circuit / Overload / Over voltage / Over temp. Fully enclosed plastic case Fix switching frequency and regulation Topology: Top switch circuit LED indicator for power on Approvals: UL / CUL / TUV / CB / CE 2 years warranty
EN 60601-1 IEC 60601-1
SPECIFICATION
ORDER NO. SAFETY MODEL NO. DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT MES50A-0R1B MES50A-1R1B MES50A-1-1R1B MES50A-2P1J MES50A-3P1J MES50A-4P1J MES50A-5P1J MES50A-6P1J MES50A-8P1J MES50A-0
Note.2 3.3V
MES50A-1 5V 7.5A 0 ~ 7.5A 37.5W 50mVp-p 6.0% 1.0% 6.0%
MES50A-1-1 MES50A-2 7.5V 5.33A 0 ~ 5.33A 40W 75mVp-p 5.0% 1.0% 5.0% 9V 5.0A 0 ~ 5.0A 45W 90mVp-p 5.0% 1.0% 5.0%
MES50A-3 12V 4.16A 0 ~ 4.16A 50W 100mVp-p 3.0% 1.0% 3.0%
MES50A-4 15V 3.33A 0 ~ 3.33A 50W 100mVp-p 3.0% 1.0% 3.0%
MES50A-5 18V 2.77A 0 ~ 2.77A 50W 150mVp-p 3.0% 1.0% 3.0%
MES50A-6 24V 2.08A 0 ~ 2.08A 50W 150mVp-p 2.0% 1.0% 2.0%
MES50A-8 48V 1.04A 0 ~ 1.04A 50W 200mVp-p 2.0% 1.0% 2.0%
7.5A 0 ~ 7.5A 24.75W
RIPPLE & NOISE (max.) Note.3 50mVp-p Fixed VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4 8.0% LINE REGULATION LOAD REGULATION VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT (max.) OVERLOAD
Note.5 Note.6
1.0% 8.0%
SETUP, RISE, HOLD UP TIME 300ms, 50ms, 16ms at full load 90 ~ 264VAC 135~370VDC 47~63Hz 60% 90A / 230VAC 0.5mA / 240VAC 150 ~ 350% rated output power 112 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 110 ~ 150% rated output voltage Protection type : Hiccup mode, recovers automatically after fault condition is removed Tj 135 typically (IC1) detect on main control IC Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 0 ~ +65 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / ( 0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL2601-1, IEC60601-1, EN60601-1 approved I/P-O/P: 5656VDC , I/P-FG: 2828VDC I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 Compliance to EN55011(CISPR11) class B Compliance to EN61000-3-2,3 Compliance to EN60601-1-2 (EN61000-4-2,3,4,5,6,8,11) light industry level, criteria A ----147*75.5*43.2mm (L*W*H) 0.55Kg ; 36pcs / 21Kg / CARTON See page 2, Other type available by customer requested See page 2, Other type available by customer requested / 70% RH 67% 70% 72% 74% 75% 78% 78% 80% 1.5A / 100VAC
INPUT
PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note. 7) HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING PLUG CABLE
CONNECTOR NOTE
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
File Name:MES50A-SPEC 2007-05-14
24 ~ 50W AC-DC Single Output and Medical Type Desktop
Mechanical Specification
M S P - 2 2 5 sseerriie s U ES50A es
Unit:mm
43.2
145
UL2464 18AWG 4ft for 3.3~7.5V
100 10mm
SWITCHING ADAPTOR
75.5
POWER LED 147
43.2
145
UL1185 16AWG 6ft for 9V UL1185 18AWG 6ft for other
100 10mm
SWITCHING ADAPTOR
11
C"+"
75.5
POWER LED 147
ID 2.1 x OD 5.5
Plug Assignment
Standard plug: Others P1J (option)
11
Standard plug: 3.3V,5V,7.5V R1B (option)
PIN NO OUTPUT 1
524 3 1 45
o
P1J
P/N CENTER OUTPUT +
ID 2.1 x OD 5.5
COM COM +Vout COM +Vout
2 3 4 5
Derating Curve
Static Characteristics
100
100
LOAD (%)
LOAD (%)
0 15 30 45 60 70
80 60
50
0
50
60
70
80
90 100
260
Ta (
)
INPUT VOLTAGE
File Name:MES50A-SPEC 2007-05-14


▲Up To Search▲   

 
Price & Availability of MES50A

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X